Skip to content

bi7/0b: resources: Beckman Coulter Biomek labware - #1639

Open
cmoscy wants to merge 3 commits into
PyLabRobot:mainfrom
cmoscy:bi7/0b-beckman-labware
Open

cmoscy wants to merge 3 commits into
PyLabRobot:mainfrom
cmoscy:bi7/0b-beckman-labware

Conversation

@cmoscy

@cmoscy cmoscy commented Nov 16, 2026

Copy link
Copy Markdown
Contributor

Summary

  • Add Biomek tips, tip boxes, plates, lids, and reservoirs transcribed from Biomek 5 classes.
  • BiomekTip / BiomekWell carry cone and well-segment data for wall placement; tip boxes are standing racks with Biomek grip points.

Test plan

  • Beckman Coulter resource tests pass
  • Resource library page lists the new definitions

… empty cache

Choosing a device by `serial_number` compared it with `dev._serial_number`, which PyUSB fills
only once something has read `dev.serial_number`. Straight after enumeration it is None, so every
device was refused as having no serial number. The serial number is now read through the
descriptor (`dev.serial_number`), and a device without one (`iSerialNumber == 0`) is still refused.
The Biomek tips (T50F, T190F, T230, T1025F, T1070), their 96-tip boxes (BC50F, BC190F, BC230,
BC1025F, BC1070), plates (Thermo96VB_PP, BCFlat96, BCDeep96Square, Thomson_24w_Square_RB, with the
lids Biomek seats on them) and reservoirs (ThermoNUNC_350CB, Reservoir, ModularReservoir),
transcribed from Biomek 5's tip and labware classes.

A tip is a `BiomekTip`, a `Tip` that also carries its cone (the radius at its end and the length
over which it widens); a well is a `BiomekWell`, a `Well` that also carries Biomek's outline of it by
height (`WellSegment`s), from which its height <-> volume table and its wall come. Biomek uses both
to place a tip near a well's wall, as `HamiltonTip` and `TecanTip` carry their instruments' data. A
tip box is a `StandingTipRack` whose tip spots sit on its top face, where the head's mandrels meet
the tips. Each resource carries Biomek's grip point (`preferred_pickup_location`). A resource
library page lists them with their part numbers.
@cmoscy cmoscy changed the title resources: Beckman Coulter Biomek labware bi7/0b: resources: Beckman Coulter Biomek labware Nov 17, 2026
@cmoscy
cmoscy force-pushed the bi7/0b-beckman-labware branch from ab17712 to 89cfcf0 Compare November 17, 2026 03:48
@cmoscy
cmoscy marked this pull request as ready for review November 17, 2026 03:49
@cmoscy
cmoscy requested a review from a team as a code owner November 17, 2026 03:49

This branch has not been deployed

No deployments
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant